Accessories

Accessory: Magnetic Base, 7 cm (3") Accessory: Magnetic Base and 1/4"-20 Stainless Steel hardware. Use with any of our 1/4"-20 mounted Mini-UHF, rugged Satellite data and tough SHF antenna series, to affix them onto almost any ferrous surface. These mounts provide up to 11 kg (25 lbs) of holding strength. The provided 1/4"-20 screw is 9.5 mm (3/8") long to mate with many of our quick install antennas featured within this store. Mounts are available in various colors, including Black, White,...

ACC-0002, Suction Cup Base Accessory NSN: 5340-01-654-7032 Accessory: Suction Cup Base, 1/4"-20 stud. Use with any of our Mini-UHF, rugged Satellite data and SHF antenna series, to mount them onto almost any surface. These suction cups provide up to 18 kg (40 lbs) of holding strength, yet they can be released promptly and gently using just 2 fingers. The threaded 1/4"-20 stud is 9.5 mm (3/8") long to match many of our quick install antennas featured within this store. They are available in...

Accessory: Magnetic Base, 12 cm (5") Accessory: Magnetic Base and 1/4"-20 Stainless Steel hardware. Use with any of our 1/4"-20 mounted Mini-UHF, rugged Satellite data and tough SHF antenna series, to affix them onto almost any ferrous surface. These mounts provide over 24 kg (50 lbs) of holding strength. The provided 1/4"-20 screw is 9.5 mm (3/8") long to mate with many of our quick install antennas featured within this store. Mounts are available in Black.TECHNICAL SPECIFICATIONS Holding...

Accessory: UHF Satcom High Gain Mount The ACC-0005, UHF Satcom High Gain Mount, is used in conjunction with either X-Wing Antenna UC-3004-381, Tacsat Antenna UC-3004-481, or Egg-Beater Antenna UC-3004-380, as an accessory, to boost the antenna's gain passively by 3 dB (doubles the antenna gain). It is generally mounted on a metal surface, or directly on the ground to provide the antenna the optimum height for satellite operation. The mount is compatible with the following other accessories: 12...

3/8" NMO Cable Assembly and Mount (LMR-195 Coaxial Cable) The 3/8" NMO Cable Assembly consists of a 3/8" hole NMO Connector (also called a 3/8" hole NMO Mount) at one end of an LMR-195 type Coaxial Cable (or equivalent, such as HPF195, Teflon insulator, 0.2" OD PE jacket), and your chosen connector termination at the other end from the menu list. The latter is intended to connect with the radio equipment, usually a transceiver, within the vehicle. Please measure the approximate distance the...

Accessory: Bolt Mount The Antenna Accessory, Bolt Mount is used to directly fasten any single 1/4"-20 mounted antenna and accessory featured in this catalog, to a chassis of a vehicle or a metal structure. This Vehicle Mount installs with four #10-32 screws, with hole spacings of 2.6" x 4.6" (hole pattern compatible with AV 2090-4). The Bolt Mount is available in various colors, including Black, White, Olive Drab and Desert Sand. TECHNICAL SPECIFICATIONS Dimensions: 127 mm (5") x 76 mm (3") x...

Accessory: Universal Antenna Ground Mount Stake The Universal Antenna Ground Mount Stake Accessory is used to directly fasten any single 1/4"-20 mounted antenna and accessory featured in this catalog to the ground. Ground Mounts are sold in packs of 5 units (Stakes) each. ACC-0013, Antenna Ground Mount, TECHNICAL SPECIFICATIONS Dimensions: 50 mm (2") x 9.5 mm (3/8"), including center 1/4"-20 threaded stud Material: Black anodized Aluminum Weight: 9 g (0.02 lbs) Packing: Sold in packs of 5...

NATO 4-Hole Mount/NATO 6-Hole Mount Antenna Accessory The ACC-0018, NATO 4-Hole Mount and NATO 6-Hole Mount, Antenna Accessory is used to directly fasten any single 1/4"-20 mounted antenna and accessory featured in this catalog, to the chassis of a NATO standard hole pattern vehicle or metal structure. This Vehicle Mount installs with four M8 screws or six M6 screws. This Antenna Mount is available in various colors, including Black, White, Olive Drab and Desert Sand. Options are available for...

Series 319/389/334/323/335/414 Antenna Mounting Ring The ACC-0019, Antenna Mounting Ring Accessory is used to directly fasten any series 319/389/334/323/335/414 antenna in this catalog strongly to a chassis where extra strength or support is needed. The Ring adds the capture of 4 mounting screws to the normal NMO Mount, enabling these small antennas to be securely mounted and sealed on UUV, UAV/UAS, shallow underwater and low flying aircraft platforms. The Mounting Ring installs with four...

Accessory: High/Low UHF Satcom Mount The ACC-0381 High/Low Angle UHF Satcom Mount is used in conjunction with either X-Wing Antenna UC-3004-381 or Tacsat Antenna UC-3004-481 as an accessory, to increase the antenna's gain passively for satellite circuits by 3 dB (doubles the antenna gain). It also has a built-in secondary antenna to enable Line Of Sight/LOS communications, or to operate through low angle or near horizon satellites. The ACC-0381 must be mounted on a metal surface, such as the...

Universal Type N Female connector Mount and Cable Assembly. Type N Female jack/receptacle at one end of LMR-195 coaxial cable (Teflon insulator, 0.2" OD). Select cable length and other end connector.

Mount for 383 Series Omnidirectional Antennas, description The ACC-0007 Mount is compatible with all of our -383 series Onidirectional Antennas. Usually it is used in pairs for maximum strength: with one Mount near the top and one near the bottom of the antenna's Aluminum ferrule (approximately spanning the full length of the ferrule), to provide the strongest support for the antenna. They are sold individually, and in pairs (dropdown menu) for installations where the bottom or the top of the...