2 - 4 GHz (S-band)

EXPORT CONTROLS APPLICABLE Leadtime: 2 Weeks ARO SHF Broadband Omnidirectional Antenna, 3-8 GHz SHF Omni Antenna description The SL-5001-B357 is an SHF broadband omni-directional antenna for high bandwidth telemetry, LAN/WAN networking, low microwaves surveillance applications, UAV comms, etc. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO TECHNICAL SPECIFICATIONS: Frequency range: 0.3-3.0 GHz Coverage: Broadside Polarization: Linear, Vertical or Horizontal, depending on mounting orientation Gain: -2 to +2 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) for extra bandwidth* VSWR: 3.0 Connector: SMA, Female Size: 61 cm (24") x 31 cm (12") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Short Circuit impedance to provide limited ESD...

Medium Power LTE Antenna description The UL-1702-W660, Medium Power LTE Antenna is designed to service the whole set of 4G LTE bands and services, from 700 MHz to 2200 MHz and frequencies in-between bands. It may be used in general purpose LTE (Long-Term Evolution) Cellular Modem applications, or with any mobile phone network compatible device. Its internal design supports RF power levels of 100 Watts average (CW). Its medium power level tolerance is beneficial in uses such as: Law Enforcement...

Sector WiFi Panel Antenna description SL-400A-D651 WiFi Panel Antenna is a dual band high gain sector antenna. It simultaneously operates on 2.4 GHz and 5 GHz with gain of +12 dBil. It measures 36 cm/14" x 10 cm/4" x 4 cm/1.5". This antenna is intended for the extension of low power WiFi Routers and Wi-Fi Wireless Access Points, covering a 90° area Each internal radiating element comprising the antenna is DC shunted (short circuited), providing some protection from Electro-Static Discharge,...

EXPORT CONTROLS APPLICABLELeadtime: 4 Weeks AROTECHNICAL SPECIFICATIONS: Frequency range: 2-16 GHz Coverage: Broadside Polarization: Linear, Vertical or Horizontal, depending on mounting orientation Gain: -2 to +2 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) for extra bandwidth* VSWR: 3.0 GRAPH Connector: SMA, Female Size: 10 cm (4") x 10 cm (4") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Short Circuit impedance to provide limited ESD...

UL-2002-D640, Rugged +5 dBil L/S Band Omnidirectional Antenna (1.6-1.9/2.0-2.5 GHz) Leadtime: 2-4 weeks ARO This Omni antenna was designed for applications where a rugged, dual-band, high-gain omnidirectional antenna is required. For example, for UAV telemetry, long range LOS data and general wideband communications. This product can mount directly onto the connector of a radio set. It has a spring base enabling its use in portable and vehicle mounted applications. The UL-2002-D640 was...

+11 dBil Broadband, High Gain S-Band Directional Antenna, 2.2-2.5 GHz, description The UL-235A-498 is a broadband, +11 dBil High Gain S-Band Directional Antenna, providing continuous communications coverage across the spectrum of 2.2 GHz to 2.5 GHz and beyond. Its primary use is to enhance point-to-point Wi-Fi network signals in 802.11b and 802.11g modes (2.400-2.485 GHz), or those of licensed and unlicensed WiMax in the Americas (2.3 GHz, 2.5 GHz, 2.6 GHz, and 2.4 GHz). At most urban US...

3-4 GHz High Gain Directional Antenna Description The UL-360A-498 is a broadband, +11 dBil High Gain Directional Antenna, providing continuous communications coverage across the spectrum of 2.8 GHz to 4.4 GHz and beyond. Its primary use is to enhance Private Networks or Citizen Band Radio System (CBRS) networks operating within the 3.55-3.70 GHz spectrum. Other key uses include Remote control of Drones or UAS (Unmanned Aerial Systems) operating on the 3.6 GHz band. The broadband nature of this...

UHF Custom Omnidirectional tuned antenna, SMA Female The UL-1501-345SF-CF is a versatile, Single Band antenna for narrowband applications within the range from 700 to 2500 MHz. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO Model UL-1501-B347 is a lossless* (efficient), passive broadband antenna suitable for general two-way communications at any frequency from 500 MHz to 3.0 GHz, without any need for tuning. Other applications of this antenna include omnidirectional broadband receiving, spectrum monitoring, scanners, and low dispersion jamming. Its 50 Watt handling capability allows its use as a single-port, multi-function antenna, enabling multiple, simultaneous...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO PRELIMINARY DATA The UL-1501-B384 is a broadband, omnidirectional antenna intended for receive only applications, such as Electromagnetic Surveillance, Spectrum Monitoring and Metrology applications. This antenna requires a ground plane for normal operation. It features a built-in, Low Noise Amplifier (LNA), capable of spanning from 100 MHz to 3 GHz, and of surviving a total aggregate input power of 20 mW, and producing a linear response to...

Leadtime: 1 Week ARO The UL-190A-B376 is a broadband directional antenna, providing continuous communications coverage across the spectrum of 750-3000 MHz. Its many applications include rapid deployment of emergency UHF communications, Hopping or Simultaneous Multiband Wireless LAN/MAN/WAN, military LOS operations, frequency hopping and jamming sources, spectrum monitoring and management, surveillance, radio scanners, global and wide area SCADA systems and metrology. You can now use a single,...