500 - 1000 MHz (UHF)

The UL-9150-360 ISM/RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in a wide range of applications. Examples include license free (ISM) and 800/900 MHz RFID applications, Embedded antenna in IoT and metering devices, Drone/UAV/UAS antenna, and as a coupler in Wireless/RF test fixtures. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, on the rare...

Dual Band EU Mobile 3G Antenna The UL-1400-D345ESF is a versatile, Dual Band, EU Mobile Phone/3G antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this 3G product with any Cellular/Mobile telephone, modem...

Tri-Band US 3G Antenna + UMTS (834-896 MHz/1850-1990 MHz/2110-2170 MHz) Description The UL-1400-T345U is a versatile, Tri-Band, US Cellular and HSDPA/UMTS High Speed Wireless Modem antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO TECHNICAL SPECIFICATIONS: Frequency range: 0.3-3.0 GHz Coverage: Broadside Polarization: Linear, Vertical or Horizontal, depending on mounting orientation Gain: -2 to +2 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) for extra bandwidth* VSWR: 3.0 Connector: SMA, Female Size: 61 cm (24") x 31 cm (12") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Short Circuit impedance to provide limited ESD...

Medium Power LTE Antenna description The UL-1702-W660, Medium Power LTE Antenna is designed to service the whole set of 4G LTE bands and services, from 700 MHz to 2200 MHz and frequencies in-between bands. It may be used in general purpose LTE (Long-Term Evolution) Cellular Modem applications, or with any mobile phone network compatible device. Its internal design supports RF power levels of 100 Watts average (CW). Its medium power level tolerance is beneficial in uses such as: Law Enforcement...

+5 dBil ADS-B Antenna, Omnidirectional +5 dBil ADS-B antenna (Automatic Dependent Surveillance–Broadcast) designed for reception and/or transmission of all ADS-B signals. It supports both ADS-B Out frequencies of 978 MHz and 1090 MHz, as well as 1030 MHz interrogation channel. It may also be used to receive tracking data from large/high altitude airplanes and low-flying smaller craft, including some drones (future requirements). The antenna provides an omnidirectional gain of +5 dBi, linearly,...

The UL-1400-D345ESM is a versatile, Dual Band, EU Mobile Phone antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....

Dual Band US Cellular Antenna Description The UL-1400-D345USF is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem...

UHF Custom Omnidirectional tuned antenna, SMA Female The UL-1501-345SF-CF is a versatile, Single Band antenna for narrowband applications within the range from 700 to 2500 MHz. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO Model UL-1501-B347 is a lossless* (efficient), passive broadband antenna suitable for general two-way communications at any frequency from 500 MHz to 3.0 GHz, without any need for tuning. Other applications of this antenna include omnidirectional broadband receiving, spectrum monitoring, scanners, and low dispersion jamming. Its 50 Watt handling capability allows its use as a single-port, multi-function antenna, enabling multiple, simultaneous...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO PRELIMINARY DATA The UL-1501-B384 is a broadband, omnidirectional antenna intended for receive only applications, such as Electromagnetic Surveillance, Spectrum Monitoring and Metrology applications. This antenna requires a ground plane for normal operation. It features a built-in, Low Noise Amplifier (LNA), capable of spanning from 100 MHz to 3 GHz, and of surviving a total aggregate input power of 20 mW, and producing a linear response to...