1 - 2 GHz (L-band)

The UL-9150-360 ISM/RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in a wide range of applications. Examples include license free (ISM) and 800/900 MHz RFID applications, Embedded antenna in IoT and metering devices, Drone/UAV/UAS antenna, and as a coupler in Wireless/RF test fixtures. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, on the rare...

IRIDIUM COMPATIBLE EQUIPMENT ("ICE") CERTIFIED NSN: 5985-01-654-7054 (UC-1624-341RS, currently UC-1624-341RSF) UC-1624-341R Data Iridium Antenna description The UC-1624-341R is a Quadrifilar Helix Iridium Antenna with dimensions 4 cm/1.5" OD x 11 cm/4.5" H. It is designed for use with L-band (1.6 GHz) Iridium modems and radios. The Iridium network the UC-1624-341R is designed for, consists of a meshed constellation of low earth orbiting satellites (LEO satellites). The constellation is large,...

Dual Band EU Mobile 3G Antenna The UL-1400-D345ESF is a versatile, Dual Band, EU Mobile Phone/3G antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this 3G product with any Cellular/Mobile telephone, modem...

Tri-Band US 3G Antenna + UMTS (834-896 MHz/1850-1990 MHz/2110-2170 MHz) Description The UL-1400-T345U is a versatile, Tri-Band, US Cellular and HSDPA/UMTS High Speed Wireless Modem antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO TECHNICAL SPECIFICATIONS: Frequency range: 0.3-3.0 GHz Coverage: Broadside Polarization: Linear, Vertical or Horizontal, depending on mounting orientation Gain: -2 to +2 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) for extra bandwidth* VSWR: 3.0 Connector: SMA, Female Size: 61 cm (24") x 31 cm (12") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Short Circuit impedance to provide limited ESD...

Medium Power LTE Antenna description The UL-1702-W660, Medium Power LTE Antenna is designed to service the whole set of 4G LTE bands and services, from 700 MHz to 2200 MHz and frequencies in-between bands. It may be used in general purpose LTE (Long-Term Evolution) Cellular Modem applications, or with any mobile phone network compatible device. Its internal design supports RF power levels of 100 Watts average (CW). Its medium power level tolerance is beneficial in uses such as: Law Enforcement...

Thuraya Antenna Description The UC-1614-341L Thuraya Antenna is a Quadrifilar Helix structure measuring 4 cm/1.5" OD x 11 cm/4.5" H. It is designed for use on the Thuraya satellite network, covering much of Europe, Africa, the Middle East and part of Asia: Thuraya Coverage Map. This product may also be used as a Globalstar uplink antenna (Transmit band only), or as a combination Thuraya + Globalstar uplink antenna system. For a comparable worldwide solution, consider the Iridium Satellite...

NSN No. 5985015756908 (SMA Male) Amplified/Active GPS/GNSS Antenna Description The UC-1574-431R is a Quadrifilar Helix Antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers and systems. It features a built-in, robust (+10 dBm IIP3, In -5 dBm/Out +18 dBm P1dB), +22 dB Low Noise Amplifier, preceded by a GPS filter, and followed by another GPS filter (2 filters). This combination of a small QFHA, a tough LNA and 2 filters, makes the UC-1574-431R an ideal antenna...

+5 dBil ADS-B Antenna, Omnidirectional +5 dBil ADS-B antenna (Automatic Dependent Surveillance–Broadcast) designed for reception and/or transmission of all ADS-B signals. It supports both ADS-B Out frequencies of 978 MHz and 1090 MHz, as well as 1030 MHz interrogation channel. It may also be used to receive tracking data from large/high altitude airplanes and low-flying smaller craft, including some drones (future requirements). The antenna provides an omnidirectional gain of +5 dBi, linearly,...

The UL-1400-D345ESM is a versatile, Dual Band, EU Mobile Phone antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA...

UL-2002-D640, Rugged +5 dBil L/S Band Omnidirectional Antenna (1.6-1.9/2.0-2.5 GHz) Leadtime: 2-4 weeks ARO This Omni antenna was designed for applications where a rugged, dual-band, high-gain omnidirectional antenna is required. For example, for UAV telemetry, long range LOS data and general wideband communications. This product can mount directly onto the connector of a radio set. It has a spring base enabling its use in portable and vehicle mounted applications. The UL-2002-D640 was...

The UC-1574-341RS is a Quadrifilar Helix antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with L1 (1.5754 GHz) GPS receivers and systems. For embedded and weight sensitive applications (such as self-buoyant air and water platforms, like balloons and buoys), we offer a 30 gram (1 oz) lightweight version of the UL-1574-341R-LIGHT (select from above Base/Flange drop down menu). It is enclosed in a light housing, measuring 27.5 mm (1.08") OD x 99 mm (3.9") L, with an SMA Female connector at...