Filters-Bias Tees-Diplexers

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

VHF/UHF Mobile Radio Band Diplexer description VHF/UHF Mobile Radio Bands Diplexer, model DPL-0300-393, may be used to connect VHF and UHF antennas to a single coaxial cable. Alternatively, signals to and from two single band radios, one VHF and the other UHF, can be combined into a single cable. This is particularly useful where the transmission line run is long. Diplexers are bidirectional and linear. This means that the direction of a signal traversing it, transmit/outgoing or...

Tuneable UHF Cavity Bandpass Filter, Description This Tuneable UHF Cavity Bandpass Filter is a very sharp, narrowband, inline filter designed to enable communications where strong in-band signals exist, where a high degree of man-made noise prevents reliable communications, or where cohabitation with other transmitters is required. The UFL-0300-673 can be tuned to the intended operating frequency within frequencies spanning 225 MHz to 400 MHz (Aviation, Military UHF LOS bands). Use this filter...

PRELIMINARY DATA The UFL-3000-382 is an inline filter designed to be inserted between a UHF SATCOM antenna and military communications gear. It features opposite gender connectors at each end, so it can be inserted without the need of an adaptor. They are also weatherproof for tactical use. Use this filter when operating in challenging or hostile Electromagnetic environments, to relieve your radio's front end from having to contend with large amounts of integrated power, which can lower...

PRELIMINARY DATA The UFL-3125-382 is an inline filter designed to be inserted between a UHF LOS/SATCOM antenna and military communications gear. It features opposite gender connectors at each end, so it can be inserted without the need of an adaptor. They are also weatherproof for tactical use. Use this filter when operating in challenging or hostile Electromagnetic environments, to relieve your radio's front end from having to contend with large amounts of integrated power, which can lower...

Tuneable VHF Cavity Bandpass Filter, Description This Tuneable VHF Cavity Bandpass Filter is a sharp, narrowband, inline filter designed to enable communications where strong in-band signals exist, where a high degree of man-made noise prevents reliable communications, or where cohabitation with other transmitters is required. The VFL-0130-672 can be tuned to the intended operating frequency within frequencies spanning 112 MHz to 150 MHz (Aviation and Amateur Radio VHF bands). Use this filter...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...

As of May 2007, this filter model has been upgraded to Revision A, to incorporate the following improvements: greater out of band isolation, increased current handling capability to 1 Ampere, built-in protection fuse which automatically resets itself (more detail below) voltage drop through the filter has been reduced to 1/7th that of the original design (for greater power efficiency) FILTERS NOW INCLUDE A FUSE THAT RESETS AUTOMATICALLY and you may select from 4 different fuse currents. This...